Oil Discharge Monitoring equipment (ODME)
Attending engineers are trained and hold valid Certificates by ODME maker KSB Seil Co (ex Seil Seres) for ODME SS-2000, ODME S-3000 Ver1 and ODME S-3000 Ver2 (Biofuel).
After on board inspections / Servicing / Calibrations, KSB Seil Test Certificates are issued as per ship owner’s requirements
Our Service Engineers are available 24×7 for remote assistance to ship staffs in order to solve any reported functional challenge.
ODME Annual Inspection/Calibration and Certification by the maker, using dedicated portable Diagnostic-Calibration unit.
Upgrade Package of the ODME models MKII, MKIII, SS-2000 and S-3000 Ver1 to ODME S-3000 Ver2.
Products
- Valve Remote Control System
- Hydraulic Actuator
- Oil Discharge Monitoring Equipment
- Services
- Pump, valve and rotating equipment services are the basis of our flexible service concepts for products by KSB and other manufacturers.
- KSB services provided on-site and at the service centers through customized service solutions for the entire life cycle
- Certified service specialists for high-quality and competent consultancy and assistance
- Comprehensive system analyses increase pump system efficiency
- Bespoke service concepts help optimize system availability
- Original KSB spare parts help avoid costly downtime
Oil Discharge Monitoring Equipment (ODME S-3000)
ODME(Oil Discharge Monitoring Equipment) is an equipment for observing and deciding to discharge the cargos according to the rules when each tanker hull is cleaned with sea water after discharging cargos reloading another cargos. They are discharged again after being stored in the slop tank.
- Controller
- Oil Content Meter
- Motro Starter
- Pressure Switch
- Motor/Pum[ Assy.
- PPM Measurer
- Hydraulic Panel
- Sampling & Flowmeter Probe
KSB Seil Seres S-3000
KSB Seil Seres S-3000 is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products in ballast from the cargo spaces of tankers. This equipment is in full compliance with the current IMO/MARPOL Regulations MEPC 108(49) for Tanker Ships.
- Display of Ships Position GPS
- Self-calibration with automatic zeroing.
- Self-Cleaning of Measuring Vessel.
- Across running to check all components.
- Back flushing.
- PPM Alarm.
- Total Oil Limit Alarm.
- Automatic Selection of Sample Monitoring
KSB Seil Seres S663 MKIII
The System is approved in accordance with Resolution A 586 (XIV) and MEPC 51 (32) for Oily Products and also for oily substances. This equipment is in full compliance with IMO RES A 586(XIV) – MEPC 51 (32) for Tanker Ships. The SEIL SERES S663 MK-III is suitable to be retrofitted to all Tanker Ships build before the year 2005. ODME S 663 MK III is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products in ballast from the cargo spaces of tankers. The core is the Oil Content Meter, which uses an intrinsically safe multi cell detection system with automatic compensation, for detecting the actual PPM value of oil content.
- Controller
- Oil content meter.
- DP Transmitter.
- Hydraulic panel.
- Motor sampling pump
Seil Seres SS-2000
The Seil Seres SS-2000 is suitable to be retrofitted to all Tanker Ships build before the year 2005. ODME SS-2000 is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products in ballast from the cargo spaces of tankers. The System is approved in accordance with Resolution A 586 (XIV) and MEPC 51 (32) for Oily Products. Exists different alternatives to upgrade this system to S-3000 or S-3000 version 2.
- Self-calibration and automatic zeroing.
- Self-Cleaning of Measuring Vessel.
- Across running.
- PPM Alarm.
- Fresh water flushing and back flushing.
- Total Oil Limit Alarm.
- Automatic Selection of Sample Monitoring.
- Up to 3 channels etc.
